German » English

Translations for „Fertigungsverfahren“ in the German » English Dictionary (Go to English » German)

Fer·ti·gungs·ver·fah·ren N nt

Examples from the PONS Dictionary (editorially verified)

Examples from the Internet (not verified by PONS Editors)

1971 | Entstehung des Geschäftsbereichs Schaumstofftechnik

Die schrittweise Weiterentwicklung der traditionellen Fertigungsverfahren aus der Hut- und Textilfabrikation und Experimente mit Kunststoff bereiten den Weg für den neuen Geschäftsbereich Schaumstofftechnik.

Damit stößt Mayser in einen neuen technischen Bereich vor.

www.mayser.de

1971 | Creation of the foam technology business division

The step-by-step further development of the traditional production processes from hat and textile manufacture and experiments with plastics prepare the way for the new foam technology business division.

Mayser thus enters a new technological field.

www.mayser.de

Sie können derzeit bis zu 25 Quadratzentimeter große Lücken schließen.

Ihre besondere Struktur wird durch ein Fertigungsverfahren möglich, das am Fraunhofer-Institut für Lasertechnik ILT in Aachen ursprünglich für den Aufbau industrieller Prototypen entwickelt wurde – das Selective Laser Melting ( SLM ):

Ein hauchdünner Laserstrahl schmilzt den pulverisierten Werkstoff schichtweise zu Strukturen, die 80 bis 100 Mikrometer fein sein können.

www.fraunhofer.de

Currently, they are able to close fissures of up to 25 square centimeters in size.

Their unique structure is made possible through a manufacturing process that was developed at the Fraunhofer Institute for Laser Technology ILT in Aachen for the development of industrial prototypes – Selective Laser Melting ( SLM ):

A razor-thin laser beam melts the pulverized material layer-by-layer to structures that may be as delicate as 80 to 100 micrometers.

www.fraunhofer.de

JEC

Unsere Experten präsentieren wirtschaftliche Fertigungsverfahren für Faserverbundstoffe

CFK Schnittkante.

www.ilt.fraunhofer.de

JEC

Our experts will be presenting economic production processes for fiber-reinforced plastics

CFK cutting edge.

www.ilt.fraunhofer.de

Mit seinem Technologie-Portfolio kann das Fraunhofer FEP diese Schichten auf große Flächen im Industriemaßstab abscheiden.

Ziel des Dresdener Institutes ist es, Schichten von hervorragender Qualität mit einer höheren Produktivität als bei derzeit verwendeten Fertigungsverfahren aufzubringen, um dadurch letztendlich die Produktionskosten zu mindern.

Dr. Torsten Kopte, Ansprechpartner für »Solarenergie« am Fraunhofer FEP, schreibt der Dünnschichttechnologie dabei großes Potential zu:

www.fep.fraunhofer.de

Using its broad technology portfolio the Fraunhofer FEP is able to deposit these layers on large surfaces on an industrial scale.

The objective of the Fraunhofer FEP in Dresden is to apply layers of excellent quality at higher production rates than currently employed production processes in order to ultimately reduce the production costs.

Dr. Torsten Kopte, contact person for solar energy at the Fraunhofer FEP, believes thin film technology has enormous potential:

www.fep.fraunhofer.de

In maschinenfernen Energieregelkreisen auf Leitebene werden die Planung optimiert, Verlustherde in Anlagen und Fabriken identifiziert und Verbesserungsmaßnahmen eingeleitet.

Als Grundlage für die Maßnahmen zur Effizienzsteigerung werden der von den Komponenten und dem Fertigungsverfahren verursachte Energieverbrauch, die Aufteilung in Nutz- und Verlustanteil und Möglichkeiten zur Beeinflussung des Energieverbrauchs analysiert und in Modelle überführt.

Um Messdaten handhabbar und aussagefähig zu machen und Vorhersagen zu ermöglichen, wird eine im Bereich der Fertigungstechnik neuartige Modellierungstechnik entwickelt.

www.ifw.uni-stuttgart.de

In energy control systems away from the machine at control level, planning is optimised, centres of loss in plants and factories are identified and improvement measures are taken.

Serving as a basis for the measures to increase efficiency, the energy consumption caused by the components and the manufacturing process, the division into benefit and loss as well as possibilities for influencing energy consumption are analysed and converted into models.

A new type of modelling technique is being developed in the field of production engineering, in order to make measuring data manageable and meaningful as well as to facilitate predictions.

www.ifw.uni-stuttgart.de

Durch den Mehrkomponentendruck können unterschiedliche Kunststoffe, wie z. B. Gummi, ABS und Polypropylen, simuliert werden.

Mit Hilfe dieser Fertigungsverfahren ergeben sich für Konstrukteure und Entwickler viele neue Möglichkeiten in der Formgebung.

In Kombination mit biologischen Vorbildern (Bionik) können Funktionen und Strukturen, die z. B. extrem leicht und gleichzeitig stabil sind, transparent und blickdicht, mit harten oder weichen Materialeigenschaften, erfolgreich in Konstruktionen einfließen.

www.emb.fraunhofer.de

With multi-component printing, various plastics such as rubber, ABS and polypropylene can be simulated.

These production processes open up many new design possibilities for builders and developers.

In combination with biological models (bionics), for example, functions and structures that are extremely light yet stable, transparent or opaque, with hard or soft material properties, can successfully be channeled into constructions.

www.emb.fraunhofer.de

Eine gebaute Nockenwelle ist bis zu 45 Prozent leichter als eine gegossene oder geschmiedete Nockenwelle.

Antriebs- und Abtriebselemente werden designorientiert mit verschiedenen Fertigungsverfahren und Werkstoffen ausgeführt.

Gegossene Nockenwellen

www.behr-service.com

An assembled camshaft is up to 45 percent lighter than a cast or forged camshaft.

Input and output elements are made using various production processes and materials, depending on the design.

Cast camshafts

www.behr-service.com

Die schnelle Herstellung von Prototypen wird an der Fraunhofer-Einrichtung für Marine Biotechnologie EMB in Lübeck durch generative Fertigung ( Rapid Prototyping ) mit 3D-Druckern realisiert.

Dieses Fertigungsverfahren schafft ungeahnte 3D-Konstruktionsmöglichkeiten für Ingenieure und Entwickler, wie z.B. die Herstellung von Demonstrations- und Anschauungsmodellen, Funktionsteilen, Simulationen und Prototypen bis hin zu Kleinserien.

In der Medizintechnik, in Designprozessen, Produktentwicklungen und weiteren Technologiezweigen können Konstruktionsvarianten innerhalb kürzester Zeit erstellt, getestet und optimiert werden.

www.emb.fraunhofer.de

Fast prototype manufacturing is accomplished at the Fraunhofer Research Institution for Marine Biotechnology EMB in Lübeck through generative production ( rapid prototyping ) with 3D printers.

This production process offers unheard-of 3D construction possibilities for engineers and developers, including the making of display and demonstration models, functional parts, simulations and prototypes as well as small series.

In medical technology, design processes, product developments and other technological fields, construction variants can be made, tested and optimized in a very short time.

www.emb.fraunhofer.de

Would you like to add some words, phrases or translations?

Submit a new entry.

Look up "Fertigungsverfahren" in other languages

"Fertigungsverfahren" in the monolingual German dictionaries


Choose your language Deutsch | български | Ελληνικά | English | Español | Français | Italiano | Polski | Português | Русский | Slovenščina | Srpski | Türkçe | 中文