German » English

Translations for „Fertigungskosten“ in the German » English Dictionary (Go to English » German)

Fer·ti·gungs·kos·ten N pl

Examples from the Internet (not verified by PONS Editors)

English

Kürzere Time-to-Market und optimierte Fertigungskosten durch die automatisierte Konstruktion von Begehungen maritimer Krane

Liebherr-Werk Nenzing GmbH

www.v-research.at

English

Shorter time to market and optimised production costs thanks to automated design of inspections of maritime cranes

Liebherr-Werk Nenzing GmbH

www.v-research.at

Fraunhofer-Institut für Elektronische Nanosysteme

Das im Subgeschäftsfeld "Logistik" verfolgte Ziel ist die Weiterentwicklung und Integration von Komponenten für die Herstellung von neuen intelligenten Labeln, die autonom drahtlos Daten und zum Teil auch Energie mit optimaler Qualität bei minimalen Fertigungskosten übertragen können.

www.enas.fraunhofer.de

Fraunhofer Institute for Electronic Nano Systems

"Logistics" addresses the development and integration of components for manufacturing new smart labels, which autonomously and wirelessly transfer data, and to some extent energy sources with optimal quality at minimal production costs.

www.enas.fraunhofer.de

Die Herausforderung besteht in der Kombination dieser Eigenschaften :

Die Effizienz der Solarzellen soll bei acht bis zehn Prozent liegen, die erwartete Lebensdauer mindestens 20 Jahre betragen und die Fertigungskosten auf unter 0,70 Euro/Wp* gesenkt werden (2008 lagen laut OE-A Roadmap die Fertigungskosten noch bei 100 Euro/Wp).

Bei der Entwicklung wird besonderes Augenmerk auf die Umweltauswirkungen und CO2-Bilanz gelegt.

www.ivv.fraunhofer.org

The challenge is to combine these features :

The efficiency of the solar cells must be 8-10%, the expected service life must be at least 20 years, and the production costs must be reduced to less than 0.70 euro/Wp* (in 2008 the production costs were still 100 euro/Wp according to the OE-A roadmap).

Special attention in the development work will be put on the environmental impact and CO2 balance.

www.ivv.fraunhofer.org

In einem iterativen Prozess werden die Einzelprozesse in Bezug auf ihre Wirtschaftlichkeit hin bewertet und konzeptionell zu einer durchgängigen Fertigungslinie kombiniert.

Das Vorhaben MAIplast ist für den Bereich der thermoplastischen Matrix-Systeme ein optimales Instrument um die Clusterziele wie z. B. Reduktion der Fertigungskosten und Ausschussraten oder Steigerung des Automatisierungsgrads zu erreichen.

Abbildung MAI plast

www.mai-carbon.de

In an iterative process single processes are assessed with respect to their economic efficiency and then conceptually combined into an integrated manufacturing line.

In the area of thermoplastic matrix systems, the MAIplast project is an optimal instrument for achieving the cluster’s goals such as increasing the degree of automation and reducing production costs and rejection rates.

Abbildung MAI plast

www.mai-carbon.de

Erzielte Einsparung

Die Fertigungskosten der Drosselscheibe konnten durch die Zykluszeitoptimierung mit STASA QC um rd. 2'200.- EUR / Jahr gesenkt werden.

www.stasa.de

Achieved Savings

The production costs of the choke disk has been reduced due to the cycle time optimization by about 2200 Euros / year.

www.stasa.de

Dadurch soll eine sequentielle und simultane Bearbeitung gehärteter, rotationssymmetrischer Bauteile in einer Aufspannung ermöglicht werden.

Zeiteinsparungen von bis zu 50% sollen somit die Fertigungskosten erheblich reduzieren weitere Informationen:

HHFLEX Dieses Projekt wird dankenswerterweise vom Bundesministerium für Bildung und Forschung (BMBF) gefördert.

www.wzl.rwth-aachen.de

Thus a sequential and simultaneous maching of hardened, rotationally symmetric components in one setup is possible.

Economy of time up to 50% reduce the production costs substantially. further information:

HHFLEX This project is thankworthily promoted by the Bundesministerium für Bildung und Forschung (BMBF) .

www.wzl.rwth-aachen.de

Das Nachbearbeiten einer vorhandenen Rolle zahlt sich schnell durch Aufwandeinsparungen für das Bohren und Schleifen aus.

Denn 70 % der Fertigungskosten für eine neue Rolle resultieren aus den Material- und Härtungskosten, 30 % teilen sich in Ingenieur- und Zerspanungsarbeit auf.

Und Erfahrungswerte zeigen, dass bei der Überarbeitung einer Altrolle nur noch ca. 15 % der Gesamtkosten anfallen, da die neue Rolle in der Regel mit meist geringem Zerspanungsaufwand hergestellt werden kann.

www.datam.de

Re-working stocked discarded or useless rolls pays back quickly by saving the costs for raw material and working processes such as boring and milling.

70 % of the total production costs for a new roll result from costs for raw material and hardening, 30 % from design and shaping.

Experience shows that by reengineering a used roll total costs can be reduced to about 15 % due to the fact that the new roll can usually be produced at a minimum of time required for chip removal.

www.datam.de

Presseinformation ( Nr. V ) 30.4.2008

Multifunktionale Halbzeuge aus metallischen Werkstoffen eröffnen Freiräume für neue konstruktive Lösungen, Produkte mit verbesserten Eigenschaften und die Reduzierung der Fertigungskosten.

Für die effektive Herstellbarkeit von Halbzeugen aus schwer schweißbaren Werkstoffkombinationen wurde eine neue verfahrens- und systemtechnische Prinziplösung entwickelt - das Laserinduktionswalzplattieren.

www.iws.fraunhofer.de

Press release ( Nr. V ) Apr 30, 2008

Multifunctional semifinished products, consisting of metallic materials open a new horizon for novel constructive solutions for products with improved characteristics and for reduced production costs.

A new solution with regard to process- and system engineering has been developed for the effective production of semifinished products made of hard-to-weld materials combinations - the laser induction roll cladding.

www.iws.fraunhofer.de

Diese ermöglichen das Erwärmen der Werkzeugform beim Einspritzen und das rasche und gleichmäßige Abkühlen der Schmelze für eine schnelle und verzugsfreie Fertigung.

Die Herstellung großvolumiger Werkzeugeinsätze mit SLM ist allerdings sehr kostenintensiv, da die maßgeblichen Fertigungskosten vom Bauvolumen abhängen.

Wissenschaftler des Fraunhofer ILT haben daher in Zusammenarbeit mit dem Gießerei-Institut der RWTH Aachen University und Partnern aus der Industrie das SLM-Verfahren mit dem Gießverfahren kombiniert.

www.ilt.fraunhofer.de

These channels allow the tool mold to be heated up during the injection process, and the melt to cool down quickly and evenly – resulting in rapid, distortion-free manufacturing.

However, the manufacture of large-volume tool inserts using SLM is very cost-intensive, because the main production costs are volume-dependent.

To tackle this problem, scientists from Fraunhofer ILT have teamed up with the Foundry Institute at RWTH Aachen University and partners from industry in a bid to combine SLM and casting methods.

www.ilt.fraunhofer.de

Galliumnitrid in einer CMOS-Umgebung

Ein innovativer Ansatz zur Senkung der Fertigungskosten besteht in der Eingliederung der Galliumnitrid-basierten Transistoren in CMOS (Complementary metal-oxide semi-conductor)-Fertigungsl... die eine kostengünstige Serienproduktion erlauben würde.

Zudem soll in den kommenden Jahren das besondere Integrationspotential, der hohe Durchsatz und die hervorragende Funktionalität der Silizium-CMOS-Technologie mit der hohen elektrischen Leistungsdichte und Robustheit der Galliumnitrid-Bauelemente kombiniert werden, um die vielversprechenden Möglichkeiten für eine optimierte Leistungselektronik nutzbar zu machen.

www.iaf.fraunhofer.de

gallium nitride in a CMOS-surrounding

An innovative approach for a lasting reduction of production costs is, among others, an integration of the gallium-nitride-based transistors in CMOS (Complementary-metal-oxide-... lines. This would allow a cost-efficient serial production.

In the upcoming years, scientists furthermore want to combine the special integration potential, the high output and the extraordinary functionality of the silicon-CMOS-technology with the high electric power density and robustness of components based on gallium nitride, thus making the promising possibilities for optimized power electronics based on gallium nitride available for future applications.

www.iaf.fraunhofer.de

Would you like to add some words, phrases or translations?

Submit a new entry.

Look up "Fertigungskosten" in other languages


Choose your language Deutsch | български | Ελληνικά | English | Español | Français | Italiano | Polski | Português | Русский | Slovenščina | Srpski | Türkçe | 中文