Halbraum-Messungen sind daher mit einem Fehler behaftet, der umso größer wird, je dichter die Wärmeleitfähigkeiten von Sondenkörper und Probenmaterial beieinander liegen.
Aus diesem Grund weisen instationäre Halbraum-Messungen systematisch überhöhte Werte im Vergleich zu stationären Messungen auf.
Bei einem Sondenmaterial mit 0.18 W / mK ergibt sich bereits bei Wärmeleitfähigkeiten um 1 W / mK ein zusätzlicher systematischer Fehler von ca. + 10 %.
www.te-ka.deThe resulting error increases the smaller the difference in thermal conductivity between sample body and probe material.
For this reason, transient half-space tests show systematically elevated values compared to steady state tests.
If the thermal conductivity of the probe body is 0.18 W / mK, samples around 1 W / mK already show an additional systematic error of approx. + 10 %.
www.te-ka.deZusätzlich ermöglicht der Vergleich der Kurvenformen von theoretischem und gemessenem Temperatur-Verlauf die Erkennung typischer Störeffekte ( wie mangelhafter Kontakt zwischen Sonde und Probe ) bereits aus den Messdaten heraus.
Verbesserungen bei der Auswertung von Halbraum-Messungen Üblicherweise werden Halbraum-Messungen mit demselben Verfahren ausgewertet wie die Vollraum-Messungen.
Der berechnete Wärmeleitfähigkeits-Wert wird jedoch verdoppelt, da im Vergleich zu einer Vollraum-Messung die abgegebene Wärmemenge sich nur in einem Halbraum auf einer Seite der Heizquelle ausbreitet, während der andere Halbraum durch einen Sondenkörper aus wärmeisolierendem Material ersetzt ist.
www.te-ka.deAdditionally, a comparison of the curve forms of the theoretical and the measured temperature rise permits detection of typical disturbing effects ( like bad contact between probe and sample ) based on the measuring data.
Improvements in evaluating half-space tests Usually, half-space tests are evaluated using the same method as for full-space tests.
For a half-space test, the calculated thermal conductivity value is multiplied by 2, because the generated heat amount only spreads in a half space to one side of the heating source, while the other half space is replaced by a probe body made of heat insulating material.
www.te-ka.deDabei wird vorausgesetzt, dass die gesamte Heizleistung vollständig vom Proben-Halbraum aufgenommen wird.
Wärmeverteilung in Sonde und Probe bei Halbraum-Messungen
Wärmeverteilung in Sonde und Probe bei Halbraum-Messungen
www.te-ka.deIt is assumed that the heating power is absorbed completely by the sample half space.
Heat distribution in probe and sample in half-space tests
Heat distribution in probe and sample in half-space tests
www.te-ka.deWould you like to add some words, phrases or translations?
Submit a new entry.